Metal Bandsaw Blade WIKUS Primar 34-1.1-4300
WIKUS Primar 34-1.1-4300 is a high-quality bandsaw blade designed for precise and efficient metal cutting on industrial bandsaw machines. Thanks to its unique bimetal construction and proven materials, this blade provides outstanding performance, durability, and impeccable cutting quality.
Features and Advantages of WIKUS Primar 34-1.1-4300
- High-quality Materials:
- Blade Tooth: Made from high-quality **M42** high-speed steel, alloyed with cobalt. This material provides exceptional hardness up to **69 Rockwell units (HRC)**, high heat resistance, and wear resistance. This guarantees the sharpness of the cutting edge and longevity even during intensive cutting of hard metals.
- Blade Backing: Made from strong **spring steel**, which provides the necessary flexibility, tensile strength, excellent fatigue resistance, and vibration dampening. This combination ensures reliable and safe operation by balancing tooth hardness with backing flexibility.
- Variable Tooth Pitch Only: A key feature of WIKUS Primar is the presence of **exclusively variable tooth pitch**. This technological solution allows for:
- Minimizing vibrations and noise during cutting.
- Optimizing chip evacuation, preventing accumulation in the cutting zone.
- Ensuring smoother and faster cuts.
- Effectively processing different types of profiles and solid workpieces with the same blade, which increases versatility and reduces the need for frequent blade changes.
- Universal Application: The blade is ideal for cutting a wide range of metals, including structural steels, stainless steels, tool steels, non-ferrous metals, and alloys. The 34x1.1 mm size is optimal for medium to high-power bandsaw machines.
- Increased Productivity and Durability: Due to the combination of high-quality materials and optimal tooth geometry, the blade ensures high cutting speed and extended service life, which significantly reduces production costs.
- Cutting Precision: Provides a clean, even, and accurate cut, which is critically important for subsequent material processing.
Compatibility with Machines (Blade Length 4300 mm)
This saw blade is ideal for use on bandsaw machines from the manufacturer Pilous, which can be purchased on our website, specifically on the model:
Before ordering, always ensure that the blade length (4300 mm) and its width (34 mm) are compatible with your specific machine.
Available Tooth Pitches
For optimal selection for your production tasks, we have all popular variable tooth pitches for WIKUS Primar 34-1.1-4300 in stock:
- 1.4/2 TPI
- 2/3 TPI
- 3/4 TPI
- 4/6 TPI
- 5/8 TPI
- 6/10 TPI
How to Choose the Right Tooth Pitch? Recommendation Table
Choosing the correct tooth pitch (TPI - Teeth Per Inch) is crucial for efficient cutting, surface quality, and blade longevity. Use this table as a general guide for selecting the tooth pitch depending on the size and type of workpiece. General rule: the smaller the workpiece/thinner the profile, the finer the tooth pitch; the larger the workpiece/solid material, the coarser the tooth pitch.
| Diameter / Workpiece Size (mm) |
Recommended Tooth Pitch (TPI) |
Purpose |
| Up to 60 mm (thin profiles, tubes, small solid workpieces) |
6/10 TPI |
Universal pitch for thin-walled tubes and small solid workpieces. Balances speed and quality. |
| 50 - 90 mm (medium profiles, thin-walled solids) |
5/8 TPI |
For medium profiles and thin solid workpieces. Good balance between speed and quality. |
| 80 - 150 mm (large workpieces, solids) |
4/6 TPI |
Ideal for large solid workpieces and bundle cutting. Provides high productivity. |
| 140 - 250 mm (very large solid workpieces) |
3/4 TPI |
For cutting very large solid workpieces where maximum cutting aggressiveness and efficient chip removal are required. |
| 200 - 350 mm (extra-large workpieces, hard alloys) |
2/3 TPI |
A coarser pitch, designed for the largest diameters of solid workpieces and particularly hard or difficult-to-machine materials, where maximum material removal is needed. |
| 350 - 600 mm and more (extra-large workpieces, hard alloys) |
1.4/2 TPI |
The coarsest pitch, intended for the largest diameters of solid workpieces and especially hard or difficult-to-machine materials, where maximum material removal is needed. |
*Recommendations are general. The optimal choice of tooth pitch may depend on the specific material (hardness, viscosity), desired surface quality, and cutting speed. In case of doubt, please consult our specialists.
Technical Specifications
| Parameter |
Value |
| Blade Length |
4300 mm |
| Blade Width |
34 mm |
| Blade Thickness |
1.1 mm |
| Tooth Material |
M42 High-Speed Steel |
| Tooth Hardness |
69 HRC (Rockwell units) |
| Blade Backing Material |
Spring Steel |
| Tooth Pitch Type |
Variable Pitch |
| Manufacturer |
WIKUS (Germany) |
Special pricing conditions apply for enterprises. Details can be obtained from the manager.
By choosing the WIKUS Primar 34-1.1-4300 bandsaw blade, you get German quality, high productivity, and durability for your metalworking production. Contact Hoper-Trade.com.ua to select the ideal blade for your tasks and receive professional consultation.
