Metal Bandsaw Blade WIKUS Primar 27-0.9-4150
WIKUS Primar 27-0.9-4150 – this is a high-quality metal bandsaw blade, designed for precise and efficient metal cutting on industrial bandsaw machines. Thanks to its unique bimetallic construction and proven materials, this blade provides outstanding productivity, durability, and flawless cut quality.
Features and Advantages of WIKUS Primar 27-0.9-4150
- High-quality materials:
- Blade tooth: Made from high-quality **M42** high-speed steel, alloyed with cobalt. This material ensures exceptional hardness up to **69 Rockwell units (HRC)**, high heat resistance, and wear resistance. This guarantees the preservation of the cutting edge's sharpness and durability even during intensive cutting of hard metals.
- Blade base: Made from strong **spring steel**. This material provides high tensile strength, excellent resistance to fatigue and vibrations, and the flexibility required for repeated bending around the machine's pulleys. The combination of these two materials ensures an optimal balance of tooth hardness and base flexibility.
- Variable Tooth Pitch Only: A key feature of WIKUS Primar is the presence of **exclusively variable tooth pitch**. This technological solution allows to:
- Minimize vibrations and noise during cutting.
- Optimize chip evacuation, preventing its accumulation in the cutting zone.
- Ensure smoother and faster cuts.
- Effectively process different types of profiles and solid workpieces with the same blade, which increases versatility and reduces the need for frequent changes.
- Versatile Application: The blade is ideal for cutting a wide range of metals, including structural steels, stainless steels, tool steels, non-ferrous metals, and alloys. The 27x0.9 mm size is one of the most versatile for medium-power machines.
- Increased Productivity and Durability: Thanks to the combination of high-quality materials and optimal tooth geometry, the blade ensures high cutting speed and extended service life, which reduces production costs.
- High Cutting Precision: Ensures a clean, even, and accurate cut, which is critically important for further material processing.
Compatibility with machines (blade length 4150 mm)
This saw blade is ideal for use on bandsaw machines that require a blade length of **4150 mm**.
- Before ordering, make sure that the blade length is compatible with your machine.
Available Tooth Pitches
For optimal selection for your production tasks, we have all popular variable tooth pitches for WIKUS Primar 27-0.9-4150 available:
- 2/3 TPI
- 3/4 TPI
- 4/6 TPI
- 5/8 TPI
- 6/10 TPI
- 8/12 TPI
- 10/14 TPI
How to choose the right tooth pitch? Recommendation Table
Choosing the correct tooth pitch (TPI - Teeth Per Inch) is crucial for efficient cutting, surface quality, and saw blade durability. Use this table as a general guide for selecting the tooth pitch depending on the size and type of workpiece. The general rule is: the smaller the workpiece/thinner the profile, the finer the tooth pitch; the larger the workpiece/solid material, the coarser the tooth pitch.
| Diameter / Workpiece size (mm) |
Recommended tooth pitch (TPI) |
Purpose |
| Up to 25 mm (very thin profiles, pipes, small solid workpieces) |
10/14 TPI |
For cutting very thin materials and profiles. Provides the smoothest cut and minimal vibrations. |
| 20 - 40 mm (thin profiles, pipes, small solid workpieces) |
8/12 TPI |
Optimal for thin-walled pipes and small workpieces where cut quality and absence of vibrations are important. |
| 30 - 60 mm (medium profiles, thin-walled solids) |
6/10 TPI |
Universal pitch for medium profiles, pipes, and small solid workpieces. A balance between speed and quality. |
| 50 - 90 mm (medium workpieces, thick profiles) |
5/8 TPI |
For medium workpieces and thick profiles. Efficient chip evacuation and stable cut. |
| 80 - 150 mm (large workpieces, solids) |
4/6 TPI |
Ideal for large solid workpieces and bundle cutting. Provides high productivity. |
| 140 - 250 mm (very large solid workpieces) |
3/4 TPI |
For cutting very large solid workpieces where maximum aggressive cutting and efficient removal of large amounts of chips are required. |
| 200 - 350 mm and more (extra-large workpieces, hard alloys) |
2/3 TPI |
The coarsest pitch, designed for the largest diameters of solid workpieces and particularly hard or difficult-to-machine materials, where maximum material removal is needed. |
*Recommendations are general. The optimal choice of tooth pitch may depend on the specific material (hardness, viscosity), desired surface quality, and cutting speed. In case of doubt, consult our specialists.
Technical Specifications
| Parameter |
Value |
| Blade Length |
4150 mm |
| Blade Width |
27 mm |
| Blade Thickness |
0.9 mm |
| Tooth Material |
M42 High-Speed Steel |
| Tooth Hardness |
69 HRC (Rockwell units) |
| Base Material |
Spring Steel |
| Tooth Pitch Type |
Variable Pitch |
| Manufacturer |
WIKUS (Germany) |
Special pricing conditions apply for enterprises. Details can be obtained from the manager.
By choosing the WIKUS Primar 27-0.9-4150 bandsaw blade, you get German quality, high productivity, and durability for your metalworking production. Contact Hoper-Trade.com.ua to choose the ideal blade for your tasks and get professional consultation.
